An assessment of the feasibility of using image analysis in the oyster embryo-larval development test.

Abstract

In this study the feasibility of using the latest image capture, processing, and analysis techniques in the oyster embryo-larval development (OEL) test was assessed. This initially involved determining whether the OEL test could be carried out in multiwell plates (which would assist in the application of the image analysis technique), based on data from tests with the reference toxicant zinc and industrial effluents. The study then ascertained which of the 31 image analysis parameters of the Image Pro Plus software used was most appropriate for differentiating between the D larvae and non-D larvae at the end of the test procedure in a manner similar to that of visual observations. On the basis of the zinc reference toxicant and effluent test data derived in this study, the OEL test can be effectively carried out in 24 chamber multiwell plates, which provides the opportunity to count objects with image analysis software. The use of the image analysis parameters area and size (length) in combination resulted in mean control abnormalities and EC50 values in zinc reference toxicant tests which were not significantly different statistically from corresponding values derived using visual observations. Discrimination using the area and length parameters may be improved by the inclusion of other parameters in a suite of measurements which would reduce interference from extraneous material or lighting artefacts. Furthermore, the use of multiwell plates and image analysis can eliminate the variability associated with sub-sampling and inter-operator differences in the counts of D larvae and non-D larvae which is evident with the current visual observation method.