Abstract
The present study developed and evaluated nano-adsorbents based on zirconium oxide and graphene oxide (ZrO2/GO) as a novel adsorbent for the efficient removal of ammonia from industrial effluents. Fourier transform infrared (FTIR) spectroscopy, Field Emission Scanning Electron Microscope, Energy-dispersive X-ray Spectroscopy, and X-ray diffraction were used to evaluate and identify the novel adsorbent in terms of morphology, crystallography, and chemical composition. The pH (7), adsorbent quantities (20 mg), adsorbent contact time (30 min) with the sample, and initial ammonia concentration were all tuned for ammonia uptake. To validate ammonia adsorption on the ZrO2/GO adsorbent, several kinetic models and adsorption isotherms were also utilized. The results showed that the kinetics of ammonia adsorption are of the pseudo-second order due to high R2 (>0.99) value as compared first-order (R2 = 0.52). The chemical behavior and equilibrium isotherm were analyzed using the isotherm models and Langmuir model provided high R2 (>0.98) as compared Freundlich (>0.96). Hence, yielding a maximum uniform equilibrium adsorption capacity of 84.47 mg g−1. The presence of functional groups on the surface of graphene oxide and ZrO2 nanoparticles, which interact efficiently with ammonia species and provide an efficient surface for good ammonia removal, is most likely to be responsible.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.