Abstract

We propose an air-silica core microstructured optical fiber-based surface plasmon resonance (SPR) sensor to simultaneously measure temperature and refractive index (RI). The sensing channel is formed by coating the outside of the fiber with a gold film and a polydimethylsiloxane (PDMS) layer as a temperature sensing medium, and then being immersed into the liquid analyte. The plasmon mode can penetrate through the PDMS layer and then into the analyte, therefore both the temperature and the analyte RI changings can lead to the variations of SPR spectra that will be measured. Our numerical results demonstrate that the proposed sensor can support two resonance peaks in the x-polarized core mode and one resonance peak in the y-polarized core mode, therefore providing two detection approaches, peak-based and polarization-based approaches. By measuring the two peaks in the x-polarized core mode, for the peak-based approach, the temperature coefficients are −2.077 nm/°C and −2.723 nm/°C, and the RI coefficients are 1252 nm/RIU and 1931 nm/RIU, respectively. While by measuring the second peak in x-polarized core mode and the peak in y-polarized core mode, for the polarization-based approach, the temperature coefficients are −2.723 nm/°C and −3.401 nm/°C, and the RI coefficients are 1931 nm/RIU and 2973 nm/RIU, respectively.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.