Abstract

This paper experimentally characterizes unsteady effects and flow fields around the Ahmed Body, by analyzing global forces and detailed wake effects. The results are compared to those obtained under steady conditions, with varying wind tunnel velocities and different yaw angles between the model and the free stream. Unsteady fields are generated by means of oscillating blades positioned at the inlet of the test section, whose amplitudes and frequencies can be easily controlled. Specifically, low frequencies, around a few Hertz, as those in the typical range generating load oscillations on vehicles, are considered. The results in terms of force coefficients, obtained by a dynamometric balance, and velocity fields, obtained by Particle Image Velocimetry, are processed in order to derive time-average statistics and also phase-average statistics, as related to forcing blade instantaneous positioning. This type of analysis can be performed thanks to the high temporal resolution of measurement systems, around 100 Hz for the force measurements and around 4000 Hz for the velocity measurements. Results in steady conditions well compare with previous results in references, both as functions of wind tunnel velocity and yaw angles. In unsteady conditions, whatever amplitude is considered, time-average drag and lift coefficients and their dependence on yaw angle are consistently lower compared to the steady case. Phase-averaged coefficients in unsteady conditions can oscillate by around 20 % in comparison to time-average values and these fluctuations are strongly dependent on yaw angle and amplitude of oscillations, thus suggesting that they both contribute to instantaneous loads. Present investigations are related to improvements in set-up of control systems in assisted-driving (self-driving) vehicles.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.