Advancing sustainable consumption and production in cities - A transdisciplinary research and stakeholder engagement framework to address consumption-based emissions and impacts

Structural model for sustainable consumption and production adoption—A grey-DEMATEL based approach

The rising problem of severe resource scarcity, environmental pollution and ecological degradation has become a great constraint on economic development in China. Sustainable consumption and production (SCP), as a primary way to decouple economic development from environmental degradation, has been undertaken via various energy-saving and environmental protection policies in China. The main practices for SCP in China, including the adjustment of the industry structure, the promotion of a circular economy and cleaner production, the Energy Conservation and Emission Reduction Project, green procurement, and progress in waste management are discussed. Though China has made some achievements in SCP, it is still facing serious challenges. The extensive economic growth model, strengthened by local governments with the incentive of the expectation of promotion and financial reward, aggravates the problems of resources and the environment. The imbalanced development in China, including uneven development among regions, imbalanced expenditure structure between consumption and investment, and the rising inequality in income resulting in imbalanced consumption with insufficient consumption accompanied by overconsumption, is challenging the coordination of development and protection. The weak capacity for scientific and technological innovation and the underdevelopment of non-governmental organizations in China leave the government as the main player in SCP, and this is inefficient for the development of SCP. It is suggested that SCP should be put forward as a development strategy and be conducted more systematically using existing policies in China so as to promote SCP more efficiently. China’s further reform is expected to lift the institutional barriers to SCP and promote economic transformation, balanced development and social equity. In addition, the long-term capacity for SCP calls for the improvement of independent technical innovation in enterprises and extensive social participation.

The footwear industry needs a sustainable business environment due to its remarkable contributions to the economic growth of a country. Sustainable consumption and production (SCP) practices in the footwear industry can act as a pivotal driving factor for sustainable development in footwear sector of Bangladesh. The implementation of SCP practices is not an easy task for the footwear industry since there are numerous challenges in the existing supply chain. Meanwhile, the literature reveals that the lack of studies on relevant industry motivates to carry out this research. Therefore, this research focuses on the state-of-the-art literature by identifying and finding interactions among challenges to SCP practices in the footwear supply chain. Five experts from five reputed and export-oriented footwear industries were assigned to find out the challenges regarding the SCP implementation and the most important 10 challenges were identified based on experts’ feedback. To assess the cause–effect relationship among challenges, a decision-making trail and evaluation laboratory (DEMATEL) technique, a powerful decision-making tool which can find the interactions among factors, was employed. In this study, results showed that five challenges were identified as causal group challenges and remaining five identified as effect group challenges. The causal challenges are lack of top management commitment, absence of market information of green products, inadequate training facility on SCP, motivational gap among consumers, and lack of rules and regulations on SCP practices. Those challenges have net positive influence on effect group challenges such as poor compliance practices, lack of latest technological facility, lack of acceptance on green products, lack of reverse logistics facility, and poor linkage and coordination among lead firms. These results will assist decision-makers to make strategic policy regarding implementing SCP in the footwear supply chain. This study is the first one which deals with the importance of SCP practices in the context of footwear industry, and it is also important for the sustainable development of footwear sector of Bangladesh.

This paper argues that sustainable consumption and production (SCP) should play a prominent role in the formulation and implementation of the sustainable development goals (SDGs) and discusses how this could be practically done. Unsustainable patterns of consumption and production have been declared the primary cause of environmental deterioration. This was clearly recognized already at the United Nations Conference on Environment and Development (or the Rio Summit) in 1992; and this recognition has been reconfirmed in all high-level sustainability meetings since then. SCP aims to change these patterns; it is a policy agenda for addressing the root causes of our ecological predicament, while, at the same time, providing for human wellbeing and prosperity. Drawing from international agreements, practical policy experience and research from a range of disciplines, the paper provides a clarifying framework for scientifically robust, policy-relevant and practical goal-setting for SCP within the SDGs. Special attention is given to how SCP in the SDGs can create synergies with other international policy initiatives. The paper explores the advantages and disadvantages of two possible options for reflecting SCP in the SDGs framework: (i) SCP as a stand-alone goal; and (ii) SCP as a cross-cutting objective, embedded within relevant goals. While these two options are not necessarily mutually exclusive, given the competing number of issues for prioritization and the fact that a 10-Year Framework of Programs on SCP has also recently been established, it is hardly foreseeable that both options can be realized. The paper further proposes a set of basic principles for SCP at the global level and makes recommendations towards the formulation of indicators supporting SCP objectives in the SDGs.

Since 2015, the international policy community has started to agree on international agreements with ambitious middle-term and long-term goals, highly relevant to sustainable consumption and production (SCP) such as those seen in the Paris Agreement, SDGs, and the plastic-related agreements at the G7 and G20 processes. Along with this trend, there has been growing attention given to socio-technical system change or “transition”. Policy debate is putting more focus on the need to change consumption and production patterns and deal with various ecological consequences within planetary boundaries such as decarbonization, absolute reduction in material throughput, or creation of a plastic-free society. This paper examines the expansion of the policy domain of SCP in three phases; SCP focusing on pollution control and cleaner production (SCP 1.0), SCP from the perspective of product lifecycle (SCP 2.0), and SCP focusing on systematic changes in socio-technical systems driving consumption and production (SCP 3.0). The potential impact of a wider SCP policy domain can be comparable to the historical shift in discourse related to ecological modernization theory from pollution prevention to efficiency. This emerging trend corresponds to the need for a fresh approach to policy design which can facilitate transition to sustainability.

This chapter considers the contribution of business to sustainable consumption and production (SCP) and the way in which this contribution may be advanced through recognising both the experiences and the drivers of current approaches. It puts forth proposals for innovation and business models contributing to SCP. The chapter grows out of a research strand that I led on business and SCP as part of the EC funded Framework 6 Programme entitled 'Sustainable Consumption Research Exchange' (SCORE), of which I was a coordinating partner. SCORE surveyed the 'state of the art' in SCP through a diverse network of sustainability researchers and expertise from across Europe. A core team of researchers, myself included, brought together understanding from business, design, consumer behaviour and systems innovation policy in the key consumption areas of mobility, food and agriculture, and energy use and housing — responsible for 70% of the life-cycle environmental impacts of Western societies — with the aim of stimulating, fostering or forcing change to SCP theory and practice. The project research was disseminated through the publication of System Innovation for Sustainability, Vols. 1–4. In addition to this chapter, I co-authored the introduction, conclusion and a chapter entitled 'Energy Use in Houses and Buildings and Sustainable Consumption' in System Innovation for Sustainability 4: Case studies in Sustainable Consumption and Production (ed. S. Lahlou, Greenleaf Publishing, 2011).

Sustainable consumption and production for Asia: sustainability through green design and practice

Sustainable Consumption and Production Policy Options in Asia and the Pacific

This article analyses and assesses the integration of sustainable consumption and production (SCP) practices in the horticultural production of Kenyan micro-, small-, and medium-sized enterprises (MSMEs) within the framework of the EU Switch Africa Green project ‘Green Horticulture at Lake Naivasha’ (GOALAN) in the Lake Naivasha basin, Kenya. The aim of the study is to understand what facilitates and hinders the uptake of SCP practices. Using qualitative and quantitative data collection methods, this article is based on a case study approach. The study looked into (1) 158 MSMEs (project beneficiaries and non-beneficiaries) regarding their adoption and implementation of SCP practices, as well as their encountered challenges, opportunities, and evidenced outcomes; and (2) five ‘best practice’ case studies from the project beneficiary group. Findings indicate some key factors influencing the decision of MSMEs to adopt and implement SCP practices. These factors encompass access to SCP know-how, the identification of potential benefits, access to specialized and reliable markets, access to finance, and access to infrastructure. Based on the findings, the study suggests that to promote the uptake and long-term implementation of SCP practices by horticultural MSMEs, it is key to build the capacity of MSMEs, improve financial capacity to invest in SCP measures, enhance access to markets through establishing new linkages with buyers and customers, and enable infrastructure.

“The governance and practice of change of sustainable consumption and production.” Introduction to the ideas and recommendations presented in the articles in this special issue of the journal of cleaner production

Prioritizing the barriers to achieve sustainable consumption and production trends in supply chains using fuzzy Analytical Hierarchy Process

In light of the escalating challenges for the sustainability of our societies, the need for improving the research of sustainable consumption and production (SCP) aiming to make real changes on the societies towards sustainability is evident. Transdisciplinary (TD) research is a promising way to enhance SCP research; however, insights to operationalize the concept of TD research are needed for both funders and researchers. Therefore, this article proposes an innovative way to capture and analyse a research series for transdisciplinarity assessment in qualitative and quantitative terms. This new way is termed research series review (RSR). This article adopted literature analysis and partly reflexive retrospective reasoning. In particular, citation content analysis was carried out in relation to two research series selected as the cases. The results show that RSR has advantages such as clearer traceability with cause-and-effect relationships. Furthermore, a successful SCP research series is hypothesised to form an iterative process between practical and theoretical fields as well as finding opportunities and proposing solutions.

Ensuring sustainable consumption and production (SCP) patterns is an important task for achieving Sustainable Development Goal 12 by 2030. To facilitate international and domestic collaboration toward regional SCP, we developed a collaborative workshop method to generate and structure ideas about consumption and production (CP) patterns and employed the procedures for emerging Southeast Asian countries at workshops in Japan and Thailand. The main focus was on Bangkok, and the goal was to identify the implications of SCP policies. The structuring of seventeen SCP patterns chosen from 525 CP patterns generated at the workshops helped to identify the important influential factors, policy interventions, and features of probable SCP patterns. The main conclusions were the following: (1) The viewpoints of consumers and providers are important for idea generation. The products and services, as well as the systems of CP patterns, should be targeted; (2) Transition, improvement of the quality of life, and digitalization are also key directions of SCP patterns in Bangkok; (3) Culture, infrastructure, and industry are major considerations for regional SCP policy; and (4) SCP policy instruments are broader than conventional environmental policy instruments, and expanding the scope of SCP policy should be discussed more widely, especially in Asian countries.

The Sustainable Consumption and Production (SCP) Goals focus on minimizing environmental impacts and maximizing socio-economic benefits. The shift toward SCP, therefore, has been promoted after the pandemic, particularly in low- and middle-income countries (LMICs). Nevertheless, LMICs are far behind in the race. Since the majority of Asian countries are LMICs, of which 13 countries are low-income countries, the shift toward SCP would be tremendously significant. One of the most effective methods to achieve SCP would be the Processes and Production Methods (PPMs) which is also a crucial issue in the relationship between trade and the environment. The paper will analyze the importance of PPMs in the shift toward SCP. Recently, numerous PPMs-related issues have been witnessed in Asia, such as the issue of genetically modified organisms (GMOs) products approval as the greater demand for food sources in the most crowded countries–China and India) and the most recent hotly-debated law case between European Union and Indonesia about biofuels. The paper will scrutinize the legality of trade-related PPMs measures in the 1994 General Agreement on Tariffs and Trade, Oct. 30, 1947, 61 Stat. A-11, 55 U.N.T.S. 194 [hereinafter GATT 1994]. (the GATT 1994), the Sanitary and Phytosanitary Agreement (The SPS Agreement), and the Technical Barriers to Trade Agreement (the TBT Agreement) to shed light on obstacles Asian developing countries are facing in practicing PPMs in the pathway toward SCP patterns. Finally, the paper will propose some recommendations on how to produce sound PPMs measures for Asian developing countries, such as promulgating consultation with other stakeholders before implementing PPMs, enhancing technical aid and fund from developed countries, and setting regional PPMs-related standards.

This chapter identifies and analyses the potential impacts and contributions of efforts to achieve SDG 12 Sustainable Consumption and Production (SCP) on forests and their conservation, sustainable management and use, as well as forest livelihoods. SCP has been part of the international policy discourse for more than four decades, but the uptake of SCP has not been smooth and has tended to be biased towards relatively weak measures. The inclusion of SCP in the SDG framework gives hope that SCP will receive stronger attention in the international efforts for sustainable development. Although SDG 12 targets or indicators make no direct reference to forests or forest communities, the chapter finds that SDG12 targets can contribute positively to forest protection and conservation efforts. The review of the SDG 12 targets does not point towards any direct trade-offs between achieving the SDG12 targets and protection of forest ecosystems, resources and livelihoods. SDG 12 can contribute to creating enabling conditions for advancing more responsible and sustainable supply of timber and other forest commodities, also linked to more responsible demand. To enhance forest conservation and livelihoods through SCP beyond 2030, an integrative SCP approach addressing systemic issues is needed.