Abstract
Titanium oxide inclusions in steel are well known to inhibit grain growth and act as nucleation sites for acicular ferrite because of absorbing manganese from the surrounding steel resulting in a manganese depleted zone around the inclusion. In this article, the inclusions resulting from TiO2 additions to low-alloyed C-Mn-Cr steel were studied. Different types of TiO2 containing materials were added to liquid steel before or during casting to get small titanium-oxide–rich inclusions in steel. The main goals were to find out what happens to TiO2 in liquid steel after addition and during cooling and to study further what type of inclusions are formed in the steel as a result of the TiO2 addition. Based on the thermodynamic calculations and the results of scanning electron microscope (SEM)-energy dispersive spectroscope (EDS) and SEM-electron backscatter diffraction (EBSD) analysis, TiO2 is first reduced to Ti3O5 in liquid steel at high temperatures and then to Ti2O3 during cooling at around 1573 K (1300 °C). Both reactions liberate oxygen, which reacts with Ti, Mn, and Al forming complex Ti2O3-rich inclusions. The results also show that TiO2 additions result in more TiOx + MnO inclusions compared with experiments with Ti addition and that the absolute amount of manganese present in the inclusions is much higher in experiments with TiO2 addition than in experiments with Ti additions.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
