Activity and radiation protection studies for the W-Ta target of CSNS

Abstract

The Chinese government initiated a conceptual design for the project of China Spallation Neutron Source (CSNS), which consists of an H-linear accelerator, a rapid cycling synchrotron accelerating the beam to 1.6 GeV, a target station converting proton beam into lower energy (<1 eV) neutron beam optimised to instruments for neutron scattering applications. The facility operates at 25-Hz repetition rate with an initial beam power of 100 kW. In the target station, the target-moderator-reflector (TMR) components are exposed to the intensive fluxes of high-energy hadrons and become highly radioactive as a result of long-time irradiation. In this paper, the activity of the TMR components are calculated using the Monte Carlo code system LAHET&MCNP4C&CINDER'90. Comparisons of some results with that simulated by FLUKA code are also performed. Detailed analyses of the radionuclides and their characters in the tantalum clad tungsten target (W-Ta target) are important for the radiation protection of the CSNS target station. The shielding design of the service cell for the decay gamma ray induced from the W-Ta target and its vessel shows that the ambient dose rate decreases exponentially with increasing heavy concrete thickness. And 80 cm thickness of heavy concrete for each side of the service cell can satisfy the safety requirement.