Abstract
Active control of flow over a sphere at $). For the forcing frequencies smaller than this critical frequency, the drag is either nearly the same as, or slightly smaller than, that without forcing. The critical forcing frequency is found to be closely associated with the onset of the boundary-layer instability. It is shown from the surface-pressure measurement, surface oil-flow visualization and near-wall streamwise velocity measurement that the disturbances from the high-frequency forcing grow inside the boundary layer and delay the first separation while maintaining laminar separation, and they grow further along the separated shear layer and high momentum in the free stream is entrained toward the sphere surface, resulting in the reattachment of the flow (thus forming a separation bubble above the sphere surface) and the delay of the main separation. The reverse flow region in the wake is significantly reduced and the motion in that region also becomes weak owing to the forcing. Finally, the variation of drag by the present forcing with respect to the Reynolds number is very similar to that by dimples on the surface, but is different from that by surface roughness.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.