Abstract
This study evaluates the capacity of a series of activated carbons obtained from leather industry waste to retain mercury. The behavior of these materials was compared in two simulated flue gas compositions at laboratory scale. The atmospheres were (i) a typical coal oxy-fuel combustion atmosphere and (ii) an O2+N2 atmosphere. The activated carbons displayed different behaviors depending on their characteristics and the gas composition. The best results were obtained for the activated carbon with the highest surface area and greatest amount of micropores, sulfur and acidity character, these results being comparable to those of an activated carbon impregnated with sulfur specifically designed for capturing elemental mercury. The highest level of mercury retention was achieved in a O2+N2 atmosphere. However, independently of the ability of these materials to capture mercury, their most interesting characteristic was their ability to oxidize mercury in an oxy-combustion atmosphere, since this would facilitate the retention of mercury in flue gas desulfurization units with the consequence that the risk of damage to the CO2 compression and purification units would be reduced or even removed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.