Abstract
This work presents a microsystem that utilizes inductive power and data transfer through a backscatter-modulated carrier and a transducer interface that monitors its environment through embedded capacitive transducers. Formed on a single chip, transducers for temperature, pressure, and relative humidity are realized using a silicon-on-glass process that combines anodic bonding and a silicon-gold eutectic to realize vacuum-sealed cavities with low-impedance (6 /spl Omega/) electrical feedthroughs. Temperature is sensed capacitively using a row of Si/Au bimorph beams that produce a sensitivity of 15 fF//spl deg/C from 20 to 100/spl deg/C. The absolute pressure sensors have a sensitivity of 15 fF/torr and a range from 500 to 1200 torr, while the relative humidity sensor responds with 39 fF/%RH from 20 to 95%RH. A relaxation oscillator implements low-power capacitance-to-frequency conversion on a second chip with a sensitivity of 750 Hz/pF at 10 kHz, forming a 341 /spl mu/W transducer interface. The system is remotely powered by a 3-MHz carrier and has a volume of 32 mm/sup 3/, including the hybrid antenna wound around the perimeter of the system.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
