Abstract

A novel design method of a wideband dual-polarized antenna is presented by using shorted dipoles, integrated baluns, and crossed feed lines. Simulation and equivalent circuit analysis of the antenna are given. To validate the design method, an antenna prototype is designed, optimized, fabricated, and measured. Measured results verify that the proposed antenna has an impedance bandwidth of 74.5% (from 1.69 to 3.7 GHz) for VSWR < 1.5 at both ports, and the isolation between the two ports is over 30 dB. Stable gain of 8–8.7 dBi and half-power beamwidth (HPBW) of 65°–70° are obtained for 2G/3G/4G base station frequency bands (1.7–2.7 GHz). Compared to the other reported dual-polarized dipole antennas, the presented antenna achieves wide impedance bandwidth, high port isolation, stable antenna gain, and HPBW with a simple structure and compact size.

Highlights

  • With the rapid development of wireless communication systems, dual-polarized antennas are widely adopted owing to their advantages of reducing the multi-path fading and increasing the channel capacity [1]

  • The top layer consists of two crossed feed lines, which are used to feed the power from the baluns to the radiator

  • The overlapped impedance bandwidth for both ports is 74.5% for VSWR

Read more

Summary

A Wideband Dual-Polarized Antenna Using Shorted Dipoles

LE-HU WEN 1, STEVEN GAO1, (Senior Member, IEEE), CHUN-XU MAO 2, QI LUO1, (Member, IEEE), WEI HU3, (Member, IEEE), YINGZENG YIN3, (Member, IEEE), AND XUEXIA YANG 4, (Senior Member, IEEE).

INTRODUCTION
ANTENNA CONFIGURATION
IMPEDANCE MATCHING
RESULTS AND DISCUSSION
CONCLUSION

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.