Abstract
To get the accurate wave loads on the small-scale cylinders on the platforms, not only the incident wave but also the diffraction and radiation wave should be considered. By taking the wave diffraction from a fixed large-scale cylinder as an example, wave loads on small-diameter cylinders in the diffraction wave field are calculated by Morison formula in this paper. A time-domain numerical model on wave diffraction from large-scale structures is developed with a higher-order boundary element method (HOBEM). Then the velocity and acceleration of any water particle in the fluid domain can be produced from the solved diffraction potential. Results show that the incident wave force is even equal to diffraction wave force when the diameter of the large-scale cylinder is 8 times as great as the small-scale one; And the total force is different with the locations of the small-scale cylinder. The maximum total force is 1.57 times as great as only the incident wave force. Therefore, the wave force on the stake produced by the diffraction waves due to the existence of upper structures should be considered in the practical engineering.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
