Abstract

A detailed study on As(III) and As(V) adsorption on polymetallic sea nodule in aqueous medium has been reported. Elemental composition of sea nodule comprises primarily, iron, manganese and silicon with trace quantities of aluminium, copper, cobalt and nickel. As(V) adsorption on sea nodule is dependent on pH while As(III) is insensitive to it. Adsorption data broadly follow Langmuir isotherm. Kinetic data follow a pseudo-second-order model for both As(III) and As(V). Arsenic loading on sea nodule is dependent on initial arsenic concentration. Optimum As(III) loading is 0.74 mg/g at 0.34 mg/L and for As(V) it is 0.74 mg/g at 0.78 mg/L. As(III) adsorption is broadly independent of ionic environment. Except for PO 4 3−, As(III) adsorption is not influenced by anions but cations influence it significantly. As(V) adsorption, on the other hand, is influenced by anions and not by cations. Experimental evidence indicates an inner sphere complex for As(III) and partial inner and partial outer sphere complex for As(V). Both As(III) and As(V) adsorptions are marked with very little desorption in the pH range of 2–10. Sea nodule can speciate As(III) and As(V) in groundwater at or above pH 6. Sea nodule was successfully tested as an adsorbent for the removal of arsenic from six contaminated groundwater samples of West Bengal, India, containing arsenic in the range 0.04–0.18 mg/L.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.