Abstract
A scintillator-based neutron-counting imaging detector with a sub-100-μm spatial resolution was developed for energy-selective neutron imaging. The detector head of the detector comprised a thin ZnS/6LiF scintillator screen, a fibre-optic taper and crossed wavelength-shifting (WLS) fibre arrays. A high spatial resolution was achieved by constructing the scintillator with a thickness of 100μm and placing it in contact with the fibre-optic taper at a magnification ratio of 3.1:1. WLS fibres with a diameter of 100±5μm (mean±SD) were specially made, and their dye content was optimized for use in crossed WLS-fibre arrays. The developed detector had a pixel size of 34μm×34μm, and exhibited spatial FWHM resolutions of 80±7μm and 61±6μm in the x and y directions, respectively. A small prototype detector demonstrated the capability of neutron imaging using Bragg edges of a Cu/Fe sample when using the pulsed-neutron source in the Materials and Life Science Experimental Facility at the Japan Proton Accelerator Research Complex.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
