Abstract
High-radix routers with low latency and high bandwidth play an increasingly important role in the design of large-scale interconnection networks such as those used in super-computers and datacenters. The tile-based crossbar approach partitions a single large crossbar into many small tiles and can considerably reduce the complexity of arbitration while providing throughput higher than the conventional switch implementation. However, it is not scalable due to power consumption, placement, and routing problems. In this paper, we propose a truly scalable router microarchitecture called Multiport Binding Tile-based Router (MBTR). By aggregating multiple physical ports into a single tile a high-radix router can be flexibly organized into a different array of tiles, thus the number of tiles and hardware overhead can be considerably reduced. Compared with a hierarchical crossbar, MBTR achieves up to 50%∼75% reduction in memory consumption as well as wire area. Simulation results demonstrate MBTR is indistinguishable from the YARC router in terms of throughput and delay, and can even outperform it by reducing potential contention for output ports. We have fabricated an ASIC MBTR chip with 28nm technology. Internally, it runs at 700MHz and 30ns latency without any speedup. We also discuss how the microarchitecture parameters of MBTR can be adjusted based on the power, area, and design complexity constraints of the arbitration logic.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.