Abstract
This paper summarizes current research aimed at using polymer materials for glazing and heat exchanger components in solar water heating systems. Functional requirements, relevant polymer properties and an approach for selecting polymers are described for each of these components. Glazing must have high transmittance across the solar spectrum and withstand long term exposure to ultraviolet (UV) light. Candidate glazing materials were tested outdoors for one year in Golden, Phoenix and Miami, as well as exposed for over 300 days in an accelerated testing facility at a concentration ratio of two at the National Renewable Energy Laboratory. Measurements of hemispherical transmittance indicate that a 3.35 mm polycarbonate sheet with a thin film acrylic UV screen provides good transmittance without excessive degradation. The primary challenge to designing a polymer heat exchanger is selecting a polymer that is compatible with potable water and capable of withstanding the high pressure and temperature requirements of domestic hot water systems. Polymers certified for hot water applications by the National Sanitation Foundation or currently used in heat exchangers and exhibit good high temperature characteristics were compared on the basis of a merit value (thermal conductance per unit area per dollar) and manufacturer’s recommendations. High temperature nylon (HTN), polypropylene (PP) and cross linked polypropylene (PEX) are recommended for tube components. For structural components (i.e. headers), glass reinforced high temperature nylon (HTN), polyphthalamide (PPA), polyphenylene sulphide (PPS) and polypropylene (PP) are recommended. [S0199-6231(00)00902-3]
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
