Abstract

Synthetic aperture radar (SAR) is a powerful tool in remote sensing applications that can produce high-resolution images and operate in any weather condition. It is composed of many RF components, such as the IQ mixer, which mixes the base chirp signal (IF) with the carrier signal (LO) and increases the bandwidth of the transmitted signal to twice the maximum frequency of the base chirp signal, reducing the workload of Programmable Field Gate Arrays (FPGA) and increasing the resolution of the SAR system. This research proposes a power combiner–splitter design that will be used as a supporting component to construct the IQ mixer in SAR applications based on a rat-race coupler. The measurement results show that the coupler has good S-parameter values. S11, S22, and S33 have a low reflection value below −17 dB, S13 has a high isolation value below −22 dB, and S21 and S31 have a low attenuation value below −4 dB with amplitude unbalance below 0.1 dB and phase unbalance below 1∘. The 150 MHz requirement bandwidth for the RF signal is also achieved.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.