Abstract

A novel magnetically-coupled resonant wireless power transfer (MCR-WPT) system using an array of printed spiral resonators is presented. By replacing the single transmitting resonator in a conventional MCR-WPT with an array of smaller resonators, the transfer efficiency of the planar WPT system in both the over-coupled and under-coupled regions are significantly enhanced. Furthermore, with a proper design of the driving loop, the proposed WPT is able to provide consistent transfer efficiency even when the receiver is axially misaligned with the transmitter. Two WPT systems of the size of 10×21 mm2 and 21×21 mm2 for the transmitter, and 10×10 mm2 for the receiver are proposed. The results are compared with the conventional planar WPT of the same size. The measurement results show that with the proposed design, the transfer efficiency of the planar WPT system can be increased from 5% to 66% in the over-coupled region and from 0.75% to 40.67% in misalignment region.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.