Abstract
This work proposes a novel hybrid renewable-based cold production system consisting of an innovative yet simple design of evacuated solar collectors integrated with a biomass heater, thermal storage tanks, and an absorption machine. The optimal design, sizing of the components, and operating conditions of the hybrid system are investigated via thorough techno-economic modeling and dual-objective optimizations for a case study in India. In addition, the assessments cover different designs of biomass heaters and various biomass types. Finally, using the coefficient of performance (COP), the levelized cost of cooling (LCOC), and the emission index as the prioritization parameters, the most efficient, the most cost-effective, and the most environmentally-friendly configurations are indicated. The results show that integrating evacuated plate collectors with a specific design of biomass-heater burning sugarcane baggas is the most appropriate option from all aspects. According to the optimization results, at the best solution point, emission index and LCOC are, respectively, 440.62 kg/MWh and 47.1 USD/MWh. Moreover, the scatter distribution of major decision parameters indicates that while the volume of the hot storage tank is not a sensitive parameter, the chiller temperature and volume of the cold storage tank should be kept at their lowest bounds.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.