A Novel Equivalent Numerical Simulation Method for Non-Darcy Seepage Flow in Low-Permeability Reservoirs

Abstract

The low permeability and submicron throats in most shale or tight sandstone reservoirs have a significant impact on microscale flow. The flow characteristics can be described with difficultly by the conventional Darcy flow in low-permeability reservoirs. In particular, the thickness of the boundary layer is an important factor affecting the formation permeability, and the relative permeability curve obtained under conventional conditions cannot accurately express the seepage characteristics of porous media. In this work, the apparent permeability and relative permeability were calculated by using non-Darcy-flow mathematical modeling. The results revealed that the newly calculated oil–water relative permeability was slightly higher than that calculated by the Darcy seepage model. The results of the non-Darcy flow based on the conceptual model showed that the area swept by water in non-Darcy was smaller than that in Darcy seepage. The fingering phenomenon and the high bottom hole pressure in the non-Darcy seepage model resulted from the larger amount of injected water. There was a large pressure difference between the injection and production wells where the permeability changed greatly. A small pressure difference between wells resulted in lower variation of permeability. Consequently, the non-Darcy simulation results were consistent with actual production data.