Abstract
In the present work, we report the preparation of PLZT thin films in pure perovskite phase by RF magnetron sputtering without external substrate heating and their integration with micro-cantilevers. The ‘lift-off’ process for patterning different layers of a micro-cantilever including PLZT, Pt/Ti and Au/Cr was employed. The basic requirement of lift-off process is that the deposition temperature should not exceed 200°C otherwise photoresist will burn out. Therefore, one of the aims of the present work was to prepare PLZT film at lower deposition temperatures, which can be subsequently annealed to form pure perovskite phase. This also strongly favours the incorporation of ‘lift-off’ process for patterning in the complete process flow. As no external substrate heating was required in the deposition of PLZT film, this objective has been successfully accomplished in the present work. The ‘lift-off’ process has been successfully adopted for patterning the composite layers of PLZT/Pt/Ti and Au/Cr using thick positive photo-resist (STR-1045). Different types of cantilever beams incorporating PLZT films have been successfully fabricated using ‘lift-off’ process and bulk micromachining technology. The proposed process can be advantageously applied for the fabrication of various MEMS devices.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
