Abstract

Ever since the potential of algae in biotechnology was recognized, models describing the growth of algae inside photobioreactors have been proposed. These models are the basis for the optimization of process conditions and reactor designs. Over the last few decades, models became more and more elaborate with the increase of computational capacity. Thus far, these models have been based on light attenuation due to the absorption and scattering effects of the biomass. This manuscript presents a new way of predicting the apparent growth inside photobioreactors using simple models for enzymatic kinetics to describe the reaction between photons and the photosynthetic unit. The proposed model utilizes an inhibition kinetic formula based on the surrounding biomass to describe the average growth rate of a culture, which is determined by the local light intensities inside the reactor. The result is a mixed-inhibition scheme with multiple inhibition sites. The parameters of the new kinetic equation are replaced by empirical regression functions to correlate their dependency on incident light intensity and reactor size. The calibrations of the parameters and the regression functions are based on the numerical solutions of the growth rate computed with a classical Type II model. As a final verification, we apply the new equation in predicting the growth behavior of three phototrophic organisms in reactors of three different sizes.

Highlights

  • The boom of algal biotechnology in the last decades arises — to a certain extent — from the political pressure driving the search for a green alternative to fossil fuels

  • Mathematical models are being developed to achieve a better understanding of the relation between culture growth and light attenuation inside the reactor

  • We proposed a new logistic equation as an alternative model for the calculation of the apparent growth rate in cylindrical photobioreactors

Read more

Summary

Introduction

The boom of algal biotechnology in the last decades arises — to a certain extent — from the political pressure driving the search for a green alternative to fossil fuels. The calibration of the new derived logistic formula to numerical solutions of a classical Type II model facilitates the calculation of growth rates in cylindrical reactors of different sizes and variations of the incident light, by only changing the input of those values. In the previous two sections, we outlined the theoretical and computational strategies deployed when calculating the growth rate in photobioreactors via a standard light attenuation model. We use these calculations later in this paper to calibrate the new model we are proposing. This procedure of finding suitable regression curves for every single parameter is described in the section Results and discussion

Materials and methods
Results and discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call