Abstract
A multi-frequency vibration-based MEMS electromagnetic energy harvesting (EH) device has been presented, fabricated and characterized in this paper. It consists of a permanent magnet and a circular suspension structure on a MEMS EH chip. By emulating the magnetic field of a cylinder magnet, the gap distance between the magnet and EH chip is optimized to be zero for achieving larger magnetic flux change and higher output performance. From the experimental results, the vibration energy can be harvested at three excitation frequencies of 840, 1070 and 1490Hz, which corresponds to the out-of-plane (mode I), torsion (mode II/III) and in-plane (mode IV/V) vibrations of the EH device, respectively. The maximum power densities at these three frequencies are 0.157, 0.014 and 0.117μW/cm3, respectively, for a matched load resistance of 626Ω and an input acceleration of 1.0g. The feasibility study results show promising application potentials for harvesting energy from vibrations of multi-frequency.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
