Abstract

In this study, we verified that a quadratic slope was the best-fit compensation slope for the current feedback loop of a current-mode DC-DC converter by considering the stability of the inductor current when the current disturbance was applied. We also verified that the introduction of the input voltage dependency to the quadratic slope enabled the frequency characteristics of the current feedback loop to remain completely constant without depending on the input and output voltage change of a DC-DC converter. The test chip of a MOS current-mode buck DC-DC converter using a 0.35-µm CMOS process and a 5-MHz clock realized two loop frequency bandwidths of 130 kHz and 240 kHz and was operated in two different input and output voltage settings for each frequency bandwidth. As a result, the unaltered gain and phase frequency characteristics were obtained for two different settings in each frequency bandwidth.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.