A mixer architecture using GaN-based split-gate nanowire transistor

Abstract

Frequency mixer is an essential block in radio-frequency signal processing for frequency translation and phase comparison. The most common mixers are fabricated using passive elements which suffer from significant conversion loss and low isolation. Mixers using active devices are used less frequently and rather less matured on GaN technology. Here, we demonstrate a mixer based on GaN split-gate nanowire transistor, allowing low conversion loss and high isolation. A constriction is formed by electrostatic modulation of the effective gate width. The threshold voltage of the transistor is modified by one of the gate voltages through the width variation, while the other gate voltage biases the transistor in the saturation region. The nonlinear dependency of the transistor characteristics on the two gate voltages facilitates frequency translation. The mixing characteristics of this architecture are verified both experimentally and theoretically. The output power spectral density peaks at the difference frequency with a minimal conversion loss. Extremely high isolation is measured using three-port S-parameter measurements. The proposed architecture shows multiple benefits, additionally facilitating monolithic mixers on the GaN platform.