A macroscale damage model for the tensile and bending failure of C/C-SiC structural laminates

Abstract

This work presents a Finite Element approach to model the in-plane mechanical behavior of C/C-SiC fabrics at the lamina level, including the non-linear response of diverse lay-ups and the bending-to-tensile strength ratio at failure. The material model employs a decomposition into two idealized phases, which can be exploited to capture matrix- and fiber-dominated responses at a high level of abstraction. The constitutive law of the matrix phase adopts a Continuum Damage approach driven by two Tsai-Wu surfaces, while a quasi-brittle behavior is attributed to the fibers phase. This decomposition effectively represents the influence of matrix degradation on the response and failure of the laminates. Moreover, simulations reveal that a statistical distribution of the strength is required to represent some of the experimental outcomes. The correlation with experimental data that was achieved points out that the technique is a promising tool for supporting the early design phase of CMC structures.