Abstract
In this paper, a leaky wave antenna with dielectric superstrate (LWADS) on the perforated dielectric spacer is proposed. The LWADS has an asymmetric structure with a half-filled dielectric spacer and with a non-filled spacer to make a quasi-cutoff region. The half-filled dielectric spacer is periodically perforated, and the beam direction of leaky wave is controlled by changing the hole radius. Generally, the unwanted radiation is occurred in the broadside direction when the beam of leaky wave is tilted with large angle, this unwanted radiation is avoided by providing these perforated dielectric spacers. The proposed design is validated by measurements at X-band, and it is shown that a high gain tilted beam pattern with peak gains of 14 dBi is obtained not only at θ = 20°, 40°, but also at the wide-angle of θ = 60°. Since the effective permittivity can be controlled by the hole radius, an array of LWADS with different beam angles can be realized with the same height, and a multi-beam antenna with switched feeding can be realized.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.