Abstract
A high-power and high-efficiency monolithic power amplifier operating from 27.5 to 29.5 GHz is presented for local multipoint distribution service. Using 0.15-/spl mu/m InGaAs/AlGaAs/GaAs pseudomorphic high electron-mobility transistor devices, the two-stage power amplifier on 4-mil GaAs substrate demonstrated greater than 16-dB small-signal gain, 32-dBm (1.6 W) power with 35% power-added efficiency. The amplifier attained peak output power of 33.9 dBm (2.4 W) and peak power-added efficiency of 37%. At the peak power level, the amplifier exhibited power densities in excess of 640 mW/mm, which is the highest output power density attained by Ka-band monolithic power amplifiers. At lower drain voltage, the amplifier attained 43% power-added efficiency with 30-dBm output power.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IEEE Transactions on Microwave Theory and Techniques
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.