A High-Voltage and Low-Noise Power Amplifier for Driving Piezoelectric Stack Actuators.

Abstract

In this paper, based on the principles of general operational amplifiers, a high-voltage operational amplifier is developed. Considering the influences of piezoelectric stack actuators on the circuit, a novel structure using the high-voltage operational amplifier as a noninverting amplifier is proposed. Because of the simple circuit principles and the voltage feedback control structure, the proposed power amplifier has the advantages of low noise and small size, and it can be realized by discrete electric elements easily. In the application of precision positioning, a power amplifier using the proposed circuit principles for driving piezoelectric stack actuators is designed, simulated, and tested. The simulated results show that the proposed power amplifier could conform to the theory of the circuit. The experimental results show that the designed power amplifier conforms to the simulation, the bandwidth of the power amplifier is about 57 kHz, and the ripple of the power amplifier is less than 2 mV. Furthermore, the output of the proposed power amplifier maintains the same type of wave within in a large range of frequency, while the input is the sinusoidal or square wave, and the resolution of the mechanism which the power amplifier is applied in is about 4.5 nm. By selecting the critical electronic elements and using feedback control, the proposed circuit structure is able to realize a low-cost and high-performance power amplifier to drive piezoelectric stack actuators flexibly, which is the novel work of the paper.