Abstract

Nitrogen doped activated carbons of high surface area are synthesized using palm flower biomaterial by KOH activation followed by pyrolysis. The concentration of the activating agent KOH and carbonization temperature are found to be crucial to obtain high surface area activated carbon. The optimal concentration of KOH and carbonization temperature for the synthesis of activated carbon, respectively, are 2 M and 800 °C in the flow of nitrogen gas. The optimized conditions have been employed to further prepare nitrogen doped activated carbon (NAC) by varying the weight ratio of palm flowers to melamine. All activated carbons are characterized by powder XRD, BET analysis, RAMAN spectroscopy, HR-SEM analysis, HR-TEM analysis and FT-IR analysis. With 2 wt% nitrogen doping, the BET surface area and pore diameter of the NAC-2 sample are 1054 m2 g−1 and 1.9 nm, respectively. The electrochemical charge storage performance of the nitrogen doped activated carbons has been evaluated in an aqueous acidic electrolyte medium. The results indicate that among the nitrogen doped activated carbons, the NAC-2 sample exhibits the highest electrochemical capacitance of 296 F g−1 at 0.5 A g−1. The performance of the NAC-2 electrode is further tested in aqueous, ionic liquid and solid polymer electrolytes by assembling a symmetric capacitor for real time application. By employing an ionic liquid as the electrolyte, the device delivers an energy density of 8.6 Wh kg−1 and a power density of 38.9 W kg−1 in the voltage window of 1.5 V and at an operating current density of 0.1 A g−1. Interestingly, the NAC-2 electrode shows good cycling performance in the ionic liquid electrolyte (up to 50k cycles). Furthermore, the symmetric device in 0.1 M H2SO4/PVA solid state electrolyte shows excellent electrochemical stability under various bending angles, demonstrating its potential in flexible electronic devices.

Highlights

  • An increasing demand for energy in today's life makes us look for sufficient and sustainable production of energy from renewable sources

  • These activated carbons are designated as nitrogen doped activated carbon (NAC)-X, where X represents the wt% of nitrogen in the activated carbon

  • The surface morphology of nitrogen doped activated carbon samples was examined by highresolution scanning electron microscopy (HR-SEM; FEI Quanta FEG 200)

Read more

Summary

Introduction

An increasing demand for energy in today's life makes us look for sufficient and sustainable production of energy from renewable sources. Organic electrolytes are highly ammable and thermally unstable while ionic liquids are comparatively greener and decompose at high temperatures They both are preferable to achieve high energy density in charge storage devices.[36,37,38] Currently, efforts are on to develop foldable, exible and wearable energy storage devices to meet the demand of various applications.[39,40,41,42,43] It is imperative to produce exible solid state energy storage devices using biomass-derived activated carbon which is cheaper and much easier to process. High surface area carbon materials have been extracted from palm ower residues by optimizing the concentration of KOH solution as an activating agent and temperature for the carbonization process

Preparation of nitrogen doped activated carbon
Characterization
Electrochemical measurements
Results and discussion
Conclusions

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.