A frequency response model matching method for PID controller design for processes with dead-time

Abstract

In this paper, a PID controller design method for the integrating processes based on frequency response matching is presented. Two approaches are proposed for the controller design. In the first approach, a double feedback loop configuration is considered where the inner loop is designed with a stabilizing gain. In the outer loop, the parameters of the PID controller are obtained by frequency response matching between the closed-loop system with the PID controller and a reference model with desired specifications. In the second approach, the design is directly carried out considering a desired load-disturbance rejection model of the system. In both the approaches, two low frequency points are considered for matching the frequency response, which yield linear algebraic equations, solution of which gives the controller parameters. Several examples are taken from the literature to demonstrate the effectiveness and to compare with some well known design methods.