Abstract
This paper presents a dual-band down-conversion mixer with image rejection feature using transformer-coupled notch filter for 2.45-/5.2-GHz WLAN application. A single center-tapped transformer is integrated to form two differential series inductor–capacitor (LC) resonators as a filter circuit to create attenuation at the image frequencies in eliminating the signal distortion caused by the image signals. Furthermore, an NMOS cross-coupled pair was adopted in the notch filter to improve the image rejection capability due to the presence of negative resistance. Simulated on a standard 130nm CMOS process, the proposed transformer-coupled notch filter mixer achieves a conversion gain of 15.3/10.7 dB, input-referred third-order interception point (IIP3) of − 6.8/− 2.0 dBm and a noise figure of 8.8/14.8 dB for an input RF of 2.45/5.2 GHz with an IF of 500 MHz. The notch filter mixer consumes 5.5 mW of power from a supply voltage of 1.2 V.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
