A design approach for selecting the optimum water cover depth for subaqueous disposal of sulfide mine tailings

Abstract

The use of shallow water covers to flood reactive mine tailings is one of the most effective and common methods of managing sulfide-rich reactive mine tailings in temperate climates. One of the aspects critical to the success of subaqueous tailings disposal is the water depth required in the pond to maintain desirable water quality. Wind waves and associated pressure-driven currents could resuspend the tailings, which might result in increased oxidation and compromise the quality of the water cover. Although existing methodologies for water cover design are based on eliminating tailings resuspension, sediment-trap data from several sites in Canada still indicate resuspension in most of the ponds. In the present paper, a design methodology is proposed for optimizing the water cover depth, allowing sediment resuspension within regulatory limits. The method uses linear wave theory and countercurrent flow profiles to obtain the total bottom shear stress, which is then compared with the critical shear stress of the tailings to predict the onset of erosion and resuspension and to compute the resulting mass of suspended tailings. Application of the methodology to a tailings pond in British Columbia, Canada, indicates that although a maximum water cover depth of 2.5 m is necessary to eliminate tailings resuspension, a maximum depth of 1.5 m could still be used, as the resulting concentration of suspended tailings remains within the regulatory limit. The methodology also provides an estimate of the impact of resuspension-induced oxidation on the quality of the water cover above the tailings, such as sulfate production.Key words: mine tailings, water cover, wind waves, countercurrent flows, shear stress, resuspension.