Abstract

A multi-standard direct-conversion mixer for WCDMA, WiBro and 802.11a/b/g is designed in 0.18 /spl mu/m CMOS technology. The mixer can be used in RF receiver for multi-standard because of switched inductor matching network. Frequency band selection can be done by turning on or off the switch transistor in the matching network. Accordingly, designed mixer is able to keep measured return loss below -13 dB through 2.1/spl sim/2.5 GHz and 5.15/spl sim/5.825 GHz bands. The following results are achieved: 14/spl sim/16 dB voltage conversion gain, 8.7/spl sim/9.7 dB NF, -8/spl sim/-3.7 dBm IIP3 with 8.8 mW power consumption in 2.1/spl sim/2.5 GHz band; also, 8.3/spl sim/10 dB voltage conversion gain, 12/spl sim/13.4 dB NF and 0.1/spl sim/1.7 dBm IIP3 with same power consumption are obtained in 5.1/spl sim/5.8 GHz band,.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.