Abstract
A wideband magnitude and phase concurrent correction technique (MPCCT) is proposed in this paper. The MPCCT can concurrently correct the gain and phase imbalances between the differential signals of an active balun. This technique employs positive feedback and negative feedback as correction circuits. The two feedback loops redistribute the gain and phase imbalances into the differential outputs equally. The balun using MPCCT has the measured maximum gain 6.1dB at 59 GHz while the gain and phase imbalances are 0.14 dB and 0.7° respectively. The bandwidth of the balun is 12 GHz. The measured results demonstrate the robust correction at millimeter-wave (MMW) frequency. The power consumption is 11.6mW with 1V supply voltage and the chip area is 0.26 mm2 excluding the pads.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.