Abstract

In this paper, a 0.6 V subthsheshold CMOS voltage reference (CVR) achieving wide temperature range and high power supply ripple rejection (PSRR) is presented. The proposed CVR structure can compensate the high temperature leakage and current mirror induced mismatches so as to increase the operating temperature range. The generated reference voltage of the proposed CVR circuit is the threshold voltage difference of two NMOS transistors, leading to relatively small variations. Moreover, the enhanced current source helps achieve high PSRR. The proposed CVR circuit is implemented in a standard 0.18-μm CMOS technology. Measurement results show that, with one single trimming, a mean output of 344 mV with standard deviation of only 2.89 mV and average TC of 44.6 ppm/°C over a wide temperature range from −40 °C to 125 °C is achieved. The measured PSRR is −68 dB, −52 dB and −52 dB at 10 Hz, 100 kHz and 10 MHz, respectively. The measured line sensitivity (LS) is 0.06%/V with a power supply from 0.6 V to 2 V while consuming 19.8 nW at 0.6 V supply. The active area is 0.019 mm2.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.