Abstract
This paper presents a low-power, low-noise CMOS instrumentation amplifier intended for use in wireless bio-potential monitoring system. It employs a capacitively-coupled topology to achieve high power efficiency. In order to depress the noise, chopper-stabilized technique is used and a transconductance-boost technique is introduced in low-noise amplifier (LNA). All MOS transistors implemented in LNA are biased in subthreshold region with a supply voltage of 0.5V to reduce the power consumption. Moreover, a DC-servo loop (DSL) is implemented to realize a high-pass corner for electrode offset cancellation. Implemented in a 0.18μm CMOS process, the front-end circuit occupies 0.48mm2 and draws 1.5μA. The capacitively-coupled chopper-stabilized instrumentation amplifier (CCIA) draws 800nA and its input-referred noise is 3.5μVrms integrated from 0.5 to 1kHz, which results in a NEF of 3.8 and a PEF of 7.2 respectively. The whole circuit achieves 98dB CMRR and 73dB PSRR. The total input-referred noise of the front-end instrumentation amplifier including the DSL is 4.3μVrms integrated from 0.5 to 1kHz.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.