Abstract
Single junction hydrogenated amorphous silicon solar cells having a high conversion efficiency of 13.2% were developed by combining three approaches. First, a new type of p-layer, such as (a-Si/a-C)n multilayers, was investigated. The high open-circuit voltage was obtained without lowering the short-circuit current and the fill factor. Second, alternately repeating deposition and hydrogen plasma treatment method was applied to the fabrication of an a-SiC or wide gap a-Si : H films for p/i interface layer. High photoconductive and wide bandgap materials were obtained applicable to the p/i buffer layers. Third, the relationships between defect density of films or fill factors of solar cells and hydrogen radical in plasma were investigated. It was suggested that the H∗/SiH∗ ratio was an effective parameter to improve the defect and fill factor, and the excess hydrogen radical deteriorated quality of films and cells.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.