Abstract
Ti and Ti alloys show superior properties of lightweight, high strength and corrosion resistance, etc. Since Ti is very active at high temperature, the mechanical properties may be poor due to the oxygen and carbon contamination caused by type of substrate at high temperature and long time sintering. In this study, the effects of substrate for sintering on the mechanical properties of injection molded Ti-6Al-4V alloy were investigated using two types of substrates such as ZrO2 and Y2O3 (as-received or baked in vacuum).The relative density, microstructure and hardness of sintered compacts were changed hardly, but the tensile properties were changed by baking treatment and type of substrate for sintering. The oxygen content of the sintered compacts by using as-received ZrO2 substrate increased with increasing sintering time, then the elongation of the compacts were reduced. While the compacts using the baked ZrO2 and Y2O3 substrates showed good tensile properties because of low carbon and oxygen content.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of the Japan Society of Powder and Powder Metallurgy
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
